en flag_de  Main

atto_header_final

Attophotonics Biosciences GmbH
Viktor Kaplan
Strasse 2
2700 Wiener
Neustadt

Lab Equipment

Attophotonics’ research and development profits the close cooperation of lab and workshop. The production facilities of the company (e.g. in the Attophotonics Technikum) can be adapted flexibly to our costumers’ demands and are being continuously upgraded.

See below an overview of our instruments and materials:

Selected Lab Equipment

available at Attophotonics & its partners
 

microscopes:

  • surface tunneling microscope (STM)
  • atomic force microscope (AFM)
  • inverse microscope with phase contrast and camera
  • standard microscope
  • binocular microscope
  • 5 axis reflection microscope

 

5 axis controlled variable reflection angle microscope
microscope atto 2
I Inverse microscope with camera and phase contrast

cleanroom bench

Atto bench

with Teflon bath and pumping system, particle filter,...
 

sputter coaters:

 

  • sputter coater ‘LAB’

round targets (56 mm diameter)
8 m2 pre-pump
turbo-pumped
> 20 cm rotating table
200 W power supply
 

  • sputter coater ‘TECHNIK’

Film roller coater
< 30 cm width
2 bar targets (340 -370 mm)
68 m3 pre-pump
turbo-pumped
10 kW power supply
2 reactive gases
 

Sputter-system-small

sputter coater ‘LAB’         

evaporation coater

4 crucibles
rotating table top down (25 cm diameter)
thermal evaporation
E-beam capacitive unit
oil diffusion pumped

evap system oil diffusion pumped

laser systems:

 

  • CO2-laser system

CO2-laser
XYZ-table 430 x 300 mm
computer controlled

  • Argon-ion laser
  • He/Ne-lasers
  • various laser diode-based systems (IR to UV)

 

nano-printing station

max. width 30 cm
roll length up to 1 km
ultra compact film unit with < 7 m material loss
computer-controlled with tension and speed sensors
corona unit 35 cm width
printing unit for flexo, gravure and nano coating
UV-crosslinking station
active carbon air filter unit
jet-wash unit
PC-controlled drying unit
hot-embossing unit
(developed in collaboration with FHWN)
 

1 kW corona film system 4

Coater1A_small

photometers:

  • various VIS- & UV/VIS-photometers
  • microtiter-plate reader
  • Fiber-optic reflection spectral photometer with PC-interface

 

fluorimeters:

  • microtiter-plate fluorimeter
  • flow-through fluorimeter

 

dispersers:

developed in cooperation with FHWN

 

  • big vertical disperser with double-head system and trough

Dispergator mit Wanne

  • horizontal heating-bath disperser (stainless steel)

Dispergierer horizontal mit Heizbad

centrifuges:

various e.g.

  • table-top centrifuge for 8 x 50 ml tubes
  • table-top centrifuge for 1.5-2 ml reaction tubes
  • minifuge

 

 

electrochemistry:

  • ~ 15 potentiostates with various options (DC / AC / phase) down to fA sensitivity with PC control

Potentiostaten

electrophoresis unit

horizontal

PCR:

  • PCR-thermocycler
  • PCR-real-time-thermocycler

Real time PCR unit

mill

ball mill up to 2 kg
using ultra-hard zirconia-based ceramic balls

Kugelmahlwerk vertikal offen

ovens:

  • large chemical oven (up to 200 °C)
  • “Muffel”-oven (up to 1100 °C, with Argon purging system)
  • large electric ceramic kiln (up to 1300 °C)

I Argon oven

heating & cooling units

 

mixers, stirrers & shakers

 

several power supplies

 

chemicals:

> 800 in-house

~ 1000 external

Chemicals

etc.

 

 

 

Attophotonics Technikum

 

Technikum part 1


butterfly_small